pipeworks/autoplace_tubes.lua
2013-12-15 05:40:26 -05:00

154 lines
4.8 KiB
Lua

-- autorouting for pneumatic tubes
local function in_table(table,element)
for _,el in ipairs(table) do
if el==element then return true end
end
return false
end
local function is_tube(nodename)
return in_table(tubenodes,nodename)
end
if pipeworks == nil then
pipeworks = {}
end
--a function for determining which side of the node we are on
local function nodeside(node, tubedir)
if not tubedir or
not node or
not (type(node.param2) == "number" and node.param2 > 0 and node.param2 < 23) then
return "back"
end
--get a vector pointing back
local backdir = minetest.facedir_to_dir(node.param2)
--check whether the vector is equivalent to the tube direction; if it is, the tube's on the backside
if backdir.x == tubedir.x and backdir.y == tubedir.y and backdir.z == tubedir.z then
return "back"
end
--check whether the vector is antiparallel with the tube direction; that indicates the front
if backdir.x == -tubedir.x and backdir.y == -tubedir.y and backdir.z == -tubedir.z then
return "front"
end
--facedir is defined in terms of the top-bottom axis of the node; we'll take advantage of that
local topdir = ({[0]={x=0, y=1, z=0},
{x=0, y=0, z=1},
{x=0, y=0, z=-1},
{x=1, y=0, z=0},
{x=-1, y=0, z=0},
{x=0, y=-1, z=0}})[math.floor(node.param2/4)]
--is this the top?
if topdir.x == tubedir.x and topdir.y == tubedir.y and topdir.z == tubedir.z then
return "top"
end
--or the bottom?
if topdir.x == -tubedir.x and topdir.y == -tubedir.y and topdir.z == -tubedir.z then
return "bottom"
end
--we shall apply some maths to obtain the right-facing vector
local rightdir = {x=topdir.y*backdir.z - backdir.y*topdir.z,
y=topdir.z*backdir.x - backdir.z*topdir.x,
z=topdir.x*backdir.y - backdir.x*topdir.y}
--is this the right side?
if rightdir.x == tubedir.x and rightdir.y == tubedir.y and rightdir.z == tubedir.z then
return "right"
end
--or the left?
if rightdir.x == -tubedir.x and rightdir.y == -tubedir.y and rightdir.z == -tubedir.z then
return "left"
end
--we should be done by now; initiate panic mode
minetest.log("error", "nodeside has been confused by its parameters; see pipeworks autoplace_tubes.lua, line 78")
end
local function tube_autoroute(pos)
local active = {0, 0, 0, 0, 0, 0}
local nctr = minetest.get_node(pos)
if not is_tube(nctr.name) then return end
local adjustments = {
{ x=-1, y=0, z=0 },
{ x=1, y=0, z=0 },
{ x=0, y=-1, z=0 },
{ x=0, y=1, z=0 },
{ x=0, y=0, z=-1 },
{ x=0, y=0, z=1 }
}
-- xm = 1, xp = 2, ym = 3, yp = 4, zm = 5, zp = 6
local positions = {}
local nodes = {}
for i,adj in ipairs(adjustments) do
positions[i] = {x=pos.x+adj.x, y=pos.y+adj.y, z=pos.z+adj.z}
nodes[i] = minetest.get_node(positions[i])
end
for i,node in ipairs(nodes) do
local idef = minetest.registered_nodes[node.name]
-- handle the tubes themselves
if is_tube(node.name) then
active[i] = 1
-- handle new style connectors
elseif idef.tube and idef.tube.connect_sides then
local dir = adjustments[i]
if idef.tube.connect_sides[nodeside(node, {x=-dir.x, y=-dir.y, z=-dir.z})] then active[i] = 1 end
end
end
-- all sides checked, now figure which tube to use.
local nsurround = ""
for i,n in ipairs(active) do
nsurround = nsurround .. n
end
local newname=string.sub(nctr.name,1,-7)..nsurround
if newname == nctr.name then return end
local meta=minetest.get_meta(pos)
local meta0=meta:to_table() -- XXX: hacky_swap_node
nctr.name = newname
minetest.add_node(pos, nctr)
local meta=minetest.get_meta(pos)
meta:from_table(meta0)
local nctr = minetest.get_node(pos)
end
function pipeworks.scan_for_tube_objects(pos)
if pos == nil then return end
tube_autoroute({ x=pos.x-1, y=pos.y , z=pos.z })
tube_autoroute({ x=pos.x+1, y=pos.y , z=pos.z })
tube_autoroute({ x=pos.x , y=pos.y-1, z=pos.z })
tube_autoroute({ x=pos.x , y=pos.y+1, z=pos.z })
tube_autoroute({ x=pos.x , y=pos.y , z=pos.z-1 })
tube_autoroute({ x=pos.x , y=pos.y , z=pos.z+1 })
tube_autoroute(pos)
end
minetest.register_on_placenode(function(pos, newnode, placer, oldnode, itemstack)
if minetest.registered_items[newnode.name]
and minetest.registered_items[newnode.name].tube
and minetest.registered_items[newnode.name].tube.connect_sides then
pipeworks.scan_for_tube_objects(pos)
end
end)
minetest.register_on_dignode(function(pos, oldnode, digger)
if minetest.registered_items[oldnode.name]
and minetest.registered_items[oldnode.name].tube
and minetest.registered_items[oldnode.name].tube.connect_sides then
pipeworks.scan_for_tube_objects(pos)
end
end)